Thursday, April 18, 2024
Home Uncategorized What should be written on the ex factory package of the product

What should be written on the ex factory package of the product

by admin
0 comment

according to the domestic product quality law of the people’s Republic of China, the product packaging must meet the following requirements:

(I) have a product quality inspection certificate

(2) the name of the product, the name of the manufacturer and the location of the manufacturer

banner

(3) if it is necessary to mark the product specification, brand and the name and content of main parts and components according to the characteristics and requirements of the product, it shall be marked in Chinese; If it is necessary to inform consumers in advance, it shall be marked in Chinese. Marked on the outer package or providing relevant information to consumers in advance

(4) for the products to be used within a time limit, the production date, safe use period or validity period shall be marked in a prominent position

(5) if the product is easy to be damaged or may endanger the safety of person and property due to improper use, warning signs or warning instructions in Chinese shall be set up

naked food and other naked products that are difficult to label according to product characteristics shall not be labeled

extended materials

as one of the third set of national packaging teaching materials, packaging management and regulations combines cases with packaging related management knowledge, standards and regulations, including the introduction of packaging management, cost management of packaging enterprises, etc. Packaging enterprise quality management, packaging logistics management, packaging standardization and packaging law. Regulations, etc

focusing on the special requirements of the packaging industry, broaden and deepen the relevant contents of packaging management and economic activities, especially laws and regulations such as contract law. The patent law and trademark law closely related to the packaging industry are introduced. The laws and regulations scattered in various other laws and regulations, newspapers and magazines are summarized. Regulations and practices related to packaging hygiene, packaging boxes, etc

the regulations on packaging management are rich in content and practical. It can be used as a textbook for packaging engineering and related courses in Colleges and universities, and has a certain reference value for technicians, designers and managers in production, scientific research and design. Personnel of quality inspection and circulation department and packaging

reference source: Baidu Encyclopedia – product packaging

according to the product requirements of different industries, special product descriptions shall be made according to the industry regulations. The contents of general identification mainly include: product name, specification, material (raw material), manufacturer’s name, manufacturer’s address and telephone. The details are mainly in accordance with the national “Regulations on product identification”. The regulations are as follows:

8 regulations on product identification 7

—————————————————————————-

Article 1 in order to further standardize product identification, guide enterprises to correctly mark product identification, express product quality information and protect the legitimate rights and interests of enterprises, users and consumers, according to the domestic quality law of the people’s Republic of China and other laws These Provisions are formulated in accordance with the provisions of laws and regulations
Article 2 the term “product identification” as mentioned in these Provisions refers to the general designation of various representations used to identify products and their quality, quantity, characteristics, characteristics and use methods. Product identification can be expressed in words, symbols, numbers, patterns and other explanatory materials
Article 3 the labeling of products produced and sold within the territory of the people’s Republic of China shall comply with these provisions. Where laws, regulations, rules, mandatory national standards and industrial standards have other provisions on the marking of product marks, their provisions shall be observed at the same time
Article 4 products shall have identification. Naked food and other naked products that are difficult to attach labels according to the characteristics of the products may not be attached with product labels
Article 5 in addition to the product instructions, the product logo shall be marked on the product or the sales package of the product
if the maximum surface area of the product or product sales package is less than 10 square centimeters, only the product name and producer name can be marked on the product or product sales package; For the products to be used within a time limit, the production date, safe use period or expiration date shall also be marked on the products or their packages. Other identification contents in this regulation can be marked on other descriptions of the product
Article 6 the words used for product identification shall be standard Chinese. Chinese pinyin or foreign languages can be used at the same time. Chinese pinyin and foreign languages should be in Chinese. The font height of Chinese characters, numbers and letters used in product identification shall not be less than 1.8mm
Article 7 product identification shall be clear, firm and easy to identify
Article 8 the product identification shall have the product name. The product name shall indicate the true attributes of the product and meet the following requirements:
(1) if there are provisions on the product name in national standards and industrial standards, the name specified in national standards and industrial standards shall be adopted
(2) if there are no provisions on product names in national and industrial standards, common names or common names that will not cause misunderstanding and confusion among users and consumers shall be used
(III) if “peculiar name” and “trademark name” are marked, a name specified in items (I) and (II) of this article shall be clearly marked on the same part
Article 9 the product identification shall have the name and address of the producer. The name and address of the producer shall be registered according to law and the name and address of the producer who can bear the responsibility for product quality. Imported products may not be marked with the name and address of the original producer, but shall indicate the origin of the product (country /region, the same below), as well as the name and address of the agent, importer or seller registered in China according to law. The origin of imported products shall be determined in accordance with the Interim Provisions of the customs of the people’s Republic of China on the origin of imported goods
in case of any of the following circumstances, it shall be marked according to the following provisions:
(1) the group company or its subsidiaries that independently bear legal responsibility according to law shall mark their respective names and addresses for the products produced by them
(2) the branch company or the production base of the group company that cannot independently bear legal responsibility according to law, The name and address of the group company, branch company or production base can be marked, or only the name and address of the group company can be marked
(3) for enterprises that cooperate with each other in accordance with the contract or agreement, but operate independently, their products shall be marked with their respective producer names and addresses
(4) if the entrusted enterprise processes products for the client and is not responsible for external sales, the name and address of the client shall be marked on the products
(V) for foreign enterprises that have established offices in China, their products can be marked with the name and address of the office registered in China according to law
Article 10 qualified products produced domestically shall be attached with product quality inspection certificate
Article 11 products produced and sold domestically shall be marked with the number of national standards, industrial standards, local standards or enterprise standards that have been put on record
Article 12 the unit of measurement used in product identification shall be the legal unit of measurement
Article 13 products subject to production license management shall be marked with valid production license marks and numbers
Article 14 If it is necessary to indicate the specification, grade, quantity, net content, name and content of main components and other technical requirements of the product according to the characteristics and use requirements of the product, it shall be indicated accordingly. The marking of net content shall comply with the requirements of the provisions on measurement supervision of quantitatively packaged commodities
Article 15 the production date, safe use period or expiration date shall be indicated for the products to be used within a time limit. The expression method of date shall comply with the provisions of national standards or be expressed by “year, month and day”. The production date, safe use period or expiration date shall be printed on the product or the sales package of the product
Article 16 products that are easy to cause damage to the product itself or may endanger human health, personal and property safety due to improper use shall have warning signs or warning instructions in Chinese. For products that are highly toxic, radioactive, dangerous, fragile, afraid of pressure, need moisture-proof, cannot be inverted and have other special requirements, their packaging shall meet the requirements of laws, regulations and contracts, and shall be marked with warning signs or warning instructions in Chinese, indicating precautions for storage and transportation
Article 17 for products with complex performance, structure and use methods and difficult to install and use, detailed installation, maintenance and use instructions shall be provided in accordance with the provisions of the national, industrial and local standards of the product
Article 18 the place of origin of the products marked by the producer shall be true. The origin of products shall be marked according to the regional concept of administrative divisions
the place of origin mentioned in these Provisions refers to the place where the products are finally manufactured, processed or assembled. After the product is formed, the place of origin shall be determined in accordance with the provisions of the second paragraph of this article. Where there are other provisions in laws and administrative regulations on the identification of product origin, such provisions shall prevail
Article 19 for products with quality certification, the certification mark can be marked on the products produced within the validity period of certification
Article 20 products that have obtained the national recognized famous and high-quality titles or famous and high-quality marks can be marked with famous and high-quality titles or famous and high-quality marks. When the famous and excellent titles or famous and excellent signs are marked, the acquisition time and validity period shall be clearly indicated
Article 21 the product bar code marked on the product identification shall be a valid product bar code
Article 22 for the products specially made by the producer for the user in accordance with the contract and not directly used for sales, the product identification can be marked according to the requirements of the contract
Article 23 the identification of the goods sold by the Seller shall comply with the provisions of these measures
Article 24 producers and sellers shall not forge or falsely use the name and address of others; It is not allowed to forge the origin, production date and expiration date of the product, or forge or falsely use the production license mark, product bar code, certification mark, famous and high-quality mark and other quality certificates
Article 25 the meanings of the following terms in these Provisions are:
(I) strange names refer to product names that are difficult for users and consumers to understand and recognize because they do not follow the conventional naming methods
(2) trademark name refers to the product name named after the product’s trademark
Article 26 The State Bureau of technical supervision shall be responsible for the interpretation of these provisions
Article 27 these Provisions shall enter into force as of the date of promulgation

if it is a special industry such as medicine and food, please understand its special regulations.

for sales packaging, there should be product introduction, quality standard, production date, color, place of origin, indicative (warning) mark, product serial number, quantity, purpose, use method, brand, product name, etc.
if it is transportation packaging, it will be simpler. It only needs to indicate the name, address, contract number, destination port, number of pieces and sequence number of the consignee.

You may also like

Leave a Comment

Soledad is the Best Newspaper and Magazine WordPress Theme with tons of options and demos ready to import. This theme is perfect for blogs and excellent for online stores, news, magazine or review sites.

Buy Soledad now!

Edtior's Picks

Latest Articles

u00a92022u00a0Soledad.u00a0All Right Reserved. Designed and Developed byu00a0Penci Design.